This is a mixer to combine recorded sound samples which are stored in our library. You can make mixes and save them on this site.Pop up text will appear if you hover over each button and it will tell you what the buttons do.
1. Under the title "Choose your sounds" look for a white box and next to it a blue down arrow (V) and a play, and stop button. CLICK THE DOWN ARROW.
2. A library of sounds will pop up in a list. They are named with the group, artist, length and type of sound. CHOOSE A SOUND AND CLICK.
3. The sound will take time to load (you can see the green bar which will tell you when it is loaded). Once it is loaded CLICK PLAY AND STOP NEXT TO THE DOWN ARROW TO LISTEN/PREVIEW TO SOUND.
4. The numbers from 0 along the black bar represent time (default setting shows full seconds) CLICK IN ONE OF THE GREY RECTANGUALR BOXES next to your chosen sound to place your sound along the timeline.A coloured bar will appear to show you how long the sample lasts.YOU CAN CLICK ANOTHER SPOT ON THE LINE TO PLACE THE SOUND MORE THAN ONCE along the timeline.
5. CHOOSE MORE SOUNDS on lines below by repeating above and CLICK TO PLACE IN WHITE BOXES.
6. Use the master controls at the top to PLAY WHOLE MiX at once, STOP OR PAUSE,LOOP, or CLEAR to start again.
7. You can change the time between sample to shorter intervals of 1/4 second or 1/2 second.
8. You can make a longer mix by using the LENGTH button
9. You can add more sound lines by clicking the + button to add one line, or the 5 button to add 5 more at once.
10. Press SAVE/LOAD to save your mix.Don't forget your name in the title.
11. Have fun!
ADDED FEATURES
Adjust the volume on each sound using the left hand slider below the sound name. Make the sound move between left and right speakers using the right hand slider below the sound title.
Share
Groups
ICASP is a Major Collaborative Research Initiative, based at the University of Guelph, sponsored by the SSHRC
